Frame Builder – 4 Way Flat Connector

£2.35 – £11.70 ex VAT

Select Quantity

Clear

Quantity

REMOVE CUT TO SIZE

Remove Cut to Size

Our standard cutting tolerance is +/-2mm. Please Contact Us if greater precision is required

Length (mm)	Cut Total	?The kerf is the width of the sawblade. This width (usually 5mm) corresponds directly with the width of the slot that the sawblade will cut into the material. This material turns to swarf and therefore is lost from the length of any remaining off cut. For example, If 1 cut is requested, 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost. Cut Waste
	mm	mm	X
Length and Quantity boxes should be more than zero. If the empty row is not needed, please remove it before proceeding.
Add Cut
REMAINING OFFCUT - -- Summary Cut Totals -- ?The kerf is the width of the sawblade. This width (usually 5mm) corresponds directly with the width of the slot that the sawblade will cut into the material. This material turns to swarf and therefore is lost from the length of any remaining off cut. For example, If 1 cut is requested, 5mm of material is lost. If 10 cuts are requested, a total of 50mm of material is lost. Cut Waste (Kerf) --

Product Cost --

Cutting Cost --

Total --

Recycle offcuts Send offcuts

We accept all types of credit and debit cards.

Description

Weight	N/A
Select Quantity	1 Connector @ £2.35, Pack Of 6 @ £11.70 (£1.95 Ea)